Quickstart
This is a
Notification Sensor for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
To add this device to your network execute the following action:
press the Z-Wave button 1 time in the door sensor when the Z-Wave controller sends the instructions for inclusion or Add new devices.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
Low consumption electric quantity the door/window sensor can used more than 1 year and can open/close more than 15,000 times.
| Reset to factory default |
Press the button 6 times the device will send the reset notification to the list node in the group 1 and erases the device memory, when the light flash is resetting success"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable." |
| Inclusion |
press the Z-Wave button 1 time in the door sensor when the Z-Wave controller sends the instructions for inclusion or Add new devices. |
| Exclusion |
press the Z-Wave button 1 time in the door sensor when the Z-Wave controller sends the instructions for exclusion or Remove devices |
| NIF |
XXXNIF |
| Wakeup |
Press the button 1time the led will turn on and wakeup |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
5 |
Z-Wave Plus Lifeline |
Technical Data
| Hardware Platform |
ZM5202 |
| Device Type |
Notification Sensor |
| Network Operation |
Reporting Sleeping Slave |
| Firmware Version |
HW: 1 FW: 0.01 |
| Z-Wave Version |
6.51.06 |
| Certification ID |
ZC10-16025014 |
| Z-Wave Product Id |
0x0152.0x0500.0x0001 |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
