Quickstart

This is a On/Off Power Switch for XXXQFrequencyName. To run this device please connect it to your mains power supply. To add this device to your network execute the following action:
To include, Touch and hold any button for more than 5 seconds. LED light blinks to indicate inclusion mode.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from Z-Wave Alliance Product data and may be incomplete. Please refer to the Manufacturers Manual for more information.

Product Description

Your smart home deserves better than an ordinary light switch.Hogar touch panels are one-of-a-kind collection of switches that will transform walls from boring to an absolutely breath-taking. Fits in existing electrical boxes and does not require new wires. Innovative assembly and snap-in system make it fast and simple to install.Hogar touch panels are the modern creation of switch range that sets the tone in every room. The series makes a convincing impression with its clear structure and its choice of customized color variants. The colored glass frames come in Black, White, Moroccan Blue, Nature Green, Wooden Brown, Elegant Grey, while the metal frames are colored in Black, White, Grey and Rose Gold.Some highlights of the smart features-A touch can do more - Programmable touch buttons to act as a Toggle or Mono stable mode. Mono stable mode can give additional advantage of running scenes when used with Z-wave Home controller. -Uniform dual back light LED with 2-way feedback-Optional custom label or logo design for each button-2 minutes installation with no additional wiring-Heat, Humidity and Shock proof design, No worries in wet or hot areas-A perfect match for LED loads with protective inrush current

Reset to factory default To reset , press and hold first button(left top) for more than 15 seconds. LED lights turn OFF and ON to indicate rest. Note : Please use this procedure only when the network primary controller is missing or otherwise inoperable.
Inclusion To include, Touch and hold any button for more than 5 seconds. LED light blinks to indicate inclusion mode.
Exclusion To exclude, Touch and hold any button for more than 5 seconds. LED light blinks to indicate exclusion mode.
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Association Groups:

Group Number Maximum Nodes Description
1 1 Z-Wave Plus Lifeline
2 5 Profile: Control key01Commands: Basic SetGroup name: HGT-01
3 5 Profile: Control key01Commands: Switch Binay SetGroup name: HGT-01
4 5 Profile: Control key02Commands: BasicGroup name: HGT-02
5 5 Profile: Control key02Commands: Switch Binay SetGroup name: HGT-02
6 5 Profile: Control key03Commands: BasicGroup name: HGT-03
7 5 Profile: Control key03Commands: Switch Binay SetGroup name: HGT-03
8 5 Profile: Control key04Commands: BasicGroup name: HGT-04
9 5 Profile: Control key04Commands: Switch Binay SetGroup name: HGT-04

Technical Data

Hardware Platform ZM5202
Device Type On/Off Power Switch
Network Operation Always On Slave
Firmware Version HW: 36 FW: 2.03
Z-Wave Version 6.61.00
Certification ID ZC10-17055586
Z-Wave Product Id 0x0293.0x0003.0x001A
Firmware Updatable Updatable by Professional/Technician
Switch Type Dry Contact
Electric Load Type ELV (Electronic)FluorescentIncandescentLED
Neutral Wire Required ok
Loads Controlled 8
Communications Protocol Z-Wave Z/IP
Frequency XXfrequency
Maximum transmission power XXantenna
CEPT (Europe)On/Off Power Switch