Schlage
Schlage Connect Smart Deadbolt
SKU: BE468ZP
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Schlage Connect Smart Deadbolt combines advanced features and compatibility with your home automation or security system, allowing you to control your lock from anywhere and freeing you from the hassles of lost keys, getting locked out, or hiding a spare for friends and family.The lock comes preprogrammed with two access codes and can hold up to 30 unique codes for family members and trusted friends. The fingerprint-resistant touchscreen helps access codes stay private, minimizing tell-tale wear that can tip off possible intruders.The Schlage Connect Smart Deadbolt is battery-powered with a low battery warning that gives you weeks of advanced notice before it runs out. With guaranteed fit on standard doors, its easy for homeowners to install in minutes with just a screwdriver. The touchscreen continues to work in the event of a power outage, so you dont have to worry about getting locked outplus, a back-up key is included with the lock for peace of mind.The Schlage Connect Smart Deadbolt incorporates Z-Wave Plus S2 technology, an enhanced security protocol that features an additional layer of AES encryption of wireless signals. The Z-Wave technology allows you to integrate your exterior door locks with other Z-Wave smart home devices, such as cameras, motion detectors, lights and thermostats, bringing the safety, simplicity and style of Schlage to your smart home.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 2 | Z-Wave Lifeline |
Configuration Parameters
Parameter 12: Get Electronic Transition Count
This configuration setting indicates the number of transitions from locked to unlocked or unlocked to locked state via electronic activation. Size: 4 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | Electronic State Change Count |
Parameter 13: Get Mechanical Transition Count
This configuration setting indicates the number of transitions from locked to unlocked or unlocked to locked state via mechanical activation. Size: 4 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | Mechanical State Change Count |
Parameter 14: Get Electronic Failed Count
This configuration setting indicates the number of failed electronic activation attempts for this lock. Size: 4 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | Failed Electronic Activation Count |
Parameter 15: Auto Lock
This configuration setting controls the lock feature that automatically throws the deadbolt 30 seconds after a valid User Code has been entered at the keypad. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -1 | Enable Auto Lock |
| 0 | Disable Auto Lock |
Parameter 16: User Code PIN Length
This configuration setting controls the length of all User Codes stored in the lock. The values are 4 to 8 with default set to 4. Size: 1 Byte, Default Value: 4
| Setting | Description |
|---|---|
| 4 - 8 | User Code PIN Length |
Parameter 17: Get Electrical High Preload Transition Count
This configuration setting indicates the number of transitions from locked to unlocked or unlocked to locked state via electronic activation that indicated a high preload on the deadbolt. This value is a subset of Parameter 12. Size: 4 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | Electronic State Change Count with High Preload |
Parameter 18: Get Bootloader Version
This configuration setting returns the version number of the bootloader in the lock. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | Get Bootloader Version |
Parameter 3: Beeper
This configuration setting controls the keypad beeper of the deadbolt allowing the keypad beeper to be turned ON or OFF Size: 1 Byte, Default Value: -1
| Setting | Description |
|---|---|
| -1 | Enable Beeper |
| 0 | Disable Beeper |
Parameter 4: Vacation Mode
This configuration setting controls the keypad entry of User Codes allowing all User Codes to be turned ON (disable Vacation Mode) or OFF (enable Vacation Mode) Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| -1 | Enable Vacation Mode |
| 0 | Disable Vacation Mode |
Parameter 5: Lock and Leave Mode
This configuration setting controls the use of the u0022Schlageu0022 button on the keypad for single button push for throwing the deadbolt. Size: 1 Byte, Default Value: -1
| Setting | Description |
|---|---|
| -1 | Enable Lock and Leave Mode |
| 0 | Disable Lock and Leave Mode |
Parameter 6: User Slot Bit Field
This configuration setting indicates the occupied slots (from 1 to 30) that contain User Codes that will activate the deadbolt when entered on the keypad. Size: 4 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 - -1 | User Slot Bit Field |
Technical Data
| Hardware Platform | ZM5101 |
| Device Type | Door Lock - Keypad |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | HW: 3 FW: 3.03:11.00 |
| Z-Wave Version | 6.81.02 |
| Certification ID | ZC10-20016855 |
| Z-Wave Product Id | 0x003B.0x0001.0x0468 |
| Supported Notification Types | Access Control |
| Door Lock Type | Deadbolt |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |