This is a
The Square D 15 Amp Z-Wave Plus Energy Monitoring Duplex Receptacle is the professionals choice for secure reliable lighting control.For use in areas where you want to control a device that is not connected to a switch.The receptacle mounts inside the electrical box like a standard device so it blends into the home.Perfect for monitoring energy usage of the device plugged into the controlled outlet.It works with any Z-Wave hub and can be grouped with up to 5 other Z-Wave Plus devices.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Lifeline: Send device reset locally notificationMultiLevelReport: Dimming percentage reportMeterReport: Power metering report |
Synchronization of load power and LED indicator. Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
0 | Power On, LED Off; Power Off, LED On |
1 | Power On, LED On;Power Off, LED Off |
Hardware Platform | ZM5202 |
Device Type | On/Off Power Switch |
Network Operation | Always On Slave |
Firmware Version | HW: 1 FW: 1.11 |
Z-Wave Version | 6.82.01 |
Certification ID | ZC10-20076941 |
Z-Wave Product Id | 0x0447.0x0111.0x1105 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |