Quickstart
This is a
secure
Door Lock - Keypad for XXXQFrequencyName.
To run this device please make sure the internal battery is fully charged.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
This product supports Security 2 Command Class. While a Security S2 enabled Controller is needed in order to fully use the security feature.This product can be operated in any Z-Wave network with other Z-Wave certified products from other manufacturers.All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.This product supports the Over The Air (OTA) feature for the product's firmware upgrade.
| Reset to factory default |
XXXResetDescription |
| Inclusion |
XXXInclusionDescription |
| Exclusion |
XXXExclusionDescription |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
5 |
Lifeline group. Battery Report: Issued when battery becomes low. Notification Report: Issued by Push nodes every time a new event is detected or when a state variable has changed state. Door Lock Operation Report: Issued by a node when it has completed a lock/unlock operation initiated locally. User Code Report: Issued when a user code has changes. Device Reset locally notification: Issued when Factory Reset is performed. |
Technical Data
| Hardware Platform |
ZM5202 |
| Device Type |
Door Lock - Keypad |
| Network Operation |
Listening Sleeping Slave |
| Firmware Version |
HW: 3 FW: 1.01:02.00 |
| Z-Wave Version |
6.81.06 |
| Certification ID |
ZC10-20116997 |
| Z-Wave Product Id |
0x021D.0x0003.0x0003 |
| Firmware Updatable |
Updatable by Consumer by RF |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
