Quickstart
This is a
secure
Notification Sensor for XXXQFrequencyName.
To run this device please make sure the internal battery is fully charged.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
The Heatit Z-Smoke Detector is a multifunctional wireless smokesensor for smart home systems. With its powerful features, thesensor is designed to protect the family from potential firehazards. With its compact and streamlined design, the HeatitZ-Smoke Detector blends effortlessly with your home decor andgives you extra security.The Heatit Z-Smoke Detector is designed to provide thesensor with more features and capabilities. Therefore, you canuse optional additional features such as a built-in PIR motionsensor, heat sensor and/or emergency lighting. Heatit Z-SmokeDetector has a built-in PIR motion sensor. You can choose to useit to create custom scenes to light up the hallway in the middleof the night or help users save energy. The built-in emergencylight can also be set up to provide visual alarms and alerts.The Heatit Z-Smoke Detector uses a cutting-edge reflectivephotoelectric sensor in conjunction with an advancedmicroprocessor to deliver optimum performance by detectingdeveloping fires and heat generation. When it comes to security,there is no room for compromise.
| Reset to factory default |
XXXResetDescription |
| Inclusion |
XXXInclusionDescription |
| Exclusion |
XXXExclusionDescription |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
1 |
(Lifeline) Battery CC (COMMAND_CLASS_BATTERY)Notification CC,V4 (COMMAND_CLASS_NOTIFICATION)SensorMutilevel CC, V4 (COMMAND_CLASS_SENSOR_MULTILEVEL)Device Reset Locally CC (COMMAND_CLASS_DEVICE_RESET_LOCALLY) |
| 2 |
1 |
1.When the Smoke Detector is active, it will send Basic Set (0xFF) in Group 2.2.When the Smoke Detector is restored, it will send Basic Set (0x00) in Group 2. |
Technical Data
| Hardware Platform |
ZM5202 |
| Device Type |
Notification Sensor |
| Network Operation |
Listening Sleeping Slave |
| Firmware Version |
HW: 255 FW: 4.01 |
| Z-Wave Version |
6.81.06 |
| Certification ID |
ZC10-20127003 |
| Z-Wave Product Id |
0x019B.0x0003.0x3602 |
| Firmware Updatable |
Updatable by Consumer by RF |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
