iDevices
In-Wall Smart Switch
SKU: 61301/ZW4008
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Z-Wave Plus In-Wall Smart Switch replaces existing light switch and allows remote control from any Z-Wave certified hub.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Lifeline. Supports device reset locally and receives unsolicited status updates |
| 2 | 5 | Association group 2 supports basic set and is controlled by single pressing the button |
| 3 | 5 | Association group 3 supports basic set and is controlled by double pressing the button |
Configuration Parameters
Parameter 19: Alternate Exclusion
Alternate Exclusion Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | Press any button on the switch |
| 1 | Press two times ON button and two time OFF button, LED will flash 5 times if successful |
Parameter 3: LED Indication Configuration
LED Indication Configuration Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | LED ON when device is OFF, LED is OFF when device is ON |
| 1 | LED ON when device is ON, LED is OFF when device is OFF |
| 2 | LED always OFF |
| 3 | LED Always ON |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | On/Off Power Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 FW: 5.55 |
| Z-Wave Version | 6.81.03 |
| Certification ID | ZC10-21107058 |
| Z-Wave Product Id | 0x0458.0x4952.0x3136 |
| Z-Wave Scene Type | Scene & Central Scene |
| Switch Type | Decorator Paddle Push with Indicator |
| Firmware Updatable | Updatable by Consumer by RF |
| Neutral Wire Required | ok |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |