This is a
Yale nexTouch electrified trim for Yale and competitor rim exit devices with Push Button keypad and supporting modular radio technology
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 1 | Z-Wave Plus Lifeline |
Level control, 1 = High Volume, 2 = Low Volume, 3 =Silent. Default is 2 or Low Volume Size: 1 Byte, Default Value: 2
Setting | Description |
---|---|
1 - 3 | Sound level |
0x00 = OFF, 0xFF = ON default is 0xFF or ON. Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | One Touch Locking Off |
255 | One Touch Locking On |
0x00 = OFF, 0xFF = ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Privacy Button Off |
255 | Privacy Button On |
0x00 = OFF , 0xFF=ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Lock Status LED Off |
255 | Lock Status LED On |
01 = Lock will execute Reset To Factory.No default value Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Reset to Factory Off |
1 | Reset to Factory ON |
10 to 2540 second. This value is represented as secondsX 10. (ie a value of 4 would mean a door propped timerof 40 seconds) Set to 0x00 to disable Door ProppedAlarm. Default = 0x00 (off) Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
10 - 255 | Seconds |
0x00 = OFF, 0xFF = ON Default is 0x00 or off.Used to enable/disable door condition alarms for locksthat support a door position sensor. Any lock that doesnot support DPS will always report 0x00. Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
255 | DPS Alarm |
0x00 = OFF, 0xFF = ON default is 0x00 or OFF Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Auto Relock OFF |
255 | Auto Relock On |
0x00 = OFF, 0xFF = ON default is 0x00 or OFFIf supported switches lock to lower power mode ofoperation with reduced sound and led brightness. Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Eco Mode Off |
255 | Eco Mode on |
10 to 180 seconds default is 30 seconds Size: 1 Byte, Default Value: 30
Setting | Description |
---|---|
10 - 180 | Seconds |
3 to 10 default is 5 times Size: 1 Byte, Default Value: 5
Setting | Description |
---|---|
3 - 10 | Times |
1=English, 2=Spanish, 3=French default is 1= English Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
1 | English |
2 | Spanish |
3 | French |
10 to 180 seconds default is 60 seconds Size: 1 Byte, Default Value: 60
Setting | Description |
---|---|
10 - 180 | Seconds |
00 = normal mode (this is the default mode)01 = vacation mode, keypad lockout02= privacy mode, no keypad. RF Unlock will work Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Normal Mode |
1 | Vacation Mode |
2 | Privacy Mode |
Hardware Platform | ZM5101 |
Device Type | Door Lock - Keypad |
Network Operation | Listening Sleeping Slave |
Firmware Version | HW: 255 FW: 1.78:32.33 |
Z-Wave Version | 6.51.07 |
Certification ID | ZC10-22067114 |
Z-Wave Product Id | 0x0129.0x8102.0x0C16 |
Sensors | |
Door Lock Type | Deadbolt |
Firmware Updatable | Not Updatable |
IP (Ingress Protection) Rated | ok |
Outdoor Use | ok |
Supported Notification Types | |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |