Aqua-Scope Technologies OÜ
Aqua-Scope Ball Valve Servo
SKU: AQUEBVSZWE
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The BVS (Ball Valve Servo) with Z-Wave is a motor to retrofit existing and installed ball valves into smart water controlling devices. The motor is powered by a 12 V external power supply.
The variable clamps allow mounting even in complex pipe installations. The patented motor coupling ensures easy installation and precise long-term operation. The device can operate in difficult environmental conditions, even submerged under water and allows to directly connect one additional local water sensor pad by cable.
Remote control: Control your main water or gas valve remotely, when you have your Ball Valve Servo connected to a Z-Wave gateway.
Simple, Tools-Free: Just snap on and turn 2 knobs. Done in less then one minute!
Elbow proof: Can be installed on pipe elbows by adjustable clamps position.
Smart Adaptive Torque Control: Protects motor, valve and pipe for long term operation.
Outdoor Proof: IP67 rated, worked even submerged under water.
Integrated Water Detection Probe and Freeze Detection. Works Offline as well.
Features:
- Power Supply. 12 V / 1 A external power supply (included)
- Simple, Tools-Free: Just snap on and turn 2 knobs. Done in less then one minute!
- Elbow proof: Can be installed on pipe elbows by adjustable clamps position
- Smart Adaptive Torque Control: Protects motor, valve and pipe for long term operation
- Outdoor Proof: IP67 rated, worked even submerged under water
- Installation: Valves ½ inch to 1 ¼ inch
- Integrated Water Detection Probe and Freeze Detection. Works Offline as well.
- Clamp size: 64 - 124 mm adjustable
- Max Driving Force: 6 Nm
- Valve Control: Full open/Close, any position in between down to 1 % stepping
- Protocol: Z-Wave 700-Series
- Operatint temperature: - 30 °C - 80 °C
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.1450000x0.1300000x0.0600000 mm |
| Weight | 801 gr |
| EAN | 489705830030 |
| Certification ID | ZC12-21020179 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |