This is a
This product is "FGT-0001" that detects the opening and closing of doors and windows that support Z-Wave Plus as standard. Detects changes in the state of the place where the product is installed and notifies the controller.
Reset to factory default | XXXResetDescription |
Inclusion | XXXInclusionDescription |
Exclusion | XXXExclusionDescription |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Association Group 1 (Lifeline) |
Periodic check interval Size: 2 Byte, Default Value: 120
Setting | Description |
---|---|
1 - 1440 | periodic notification interval for the sensor |
Threshold battery level Size: 1 Byte, Default Value: 28
Setting | Description |
---|---|
1 - 50 | battery alert level. |
Magnetic sensor judgement Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 - 1 | judgment type of the magnetic sensor |
Hardware Platform | ZGM130 |
Device Type | Notification Sensor |
Network Operation | Reporting Sleeping Slave |
Firmware Version | HW: 1 FW: 7.14:01.00 |
Z-Wave Version | 7.14.3 |
Certification ID | ZC12-22010331 |
Z-Wave Product Id | 0x0112.0x0015.0x0001 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |