Quickstart

This is a secure Thermostat DT for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

  • HVAC manufacturers' Certified communication protocols.
  • 2-way communication with the HVAC equipment.
  • Control of the main parameters of the unit (Status, Operation mode, Fan speed, Set point).
  • Device powered by the indoor unit.
  • Modbus port for hard-wire integration

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Association Groups:

Group Number Maximum Nodes Description
1 1

Technical Data

Hardware Platform ZGM130S037HGN2 / ZGM130S037HGN1
Device Type Thermostat DT
Network Operation Always On Slave
Firmware Version HW: 01 FW: 10.19
Z-Wave Version 7.16.1
Certification ID ZC14-22030073
Thermostat Power Source External Transformer
IP (Ingress Protection) Rated ok
Thermostat HVAC Systems Supported Heat Pump
Thermostat Modes AutoCoolDry AirFan Only
Color White
Communications Connections Manufacturer Proprietary
Communications Protocol Manufacturer Proprietary Protocol
Firmware Updatable Updatable by Manufacturer
Frequency XXfrequency
Maximum transmission power XXantenna
Thermostat DT