This is a
1. Follow the instructions for your Z-Wave certifiedcontroller to include a device to the Z-Wave network.2. Once the controller is ready to include your device, press andrelease the Program Button to include it in the network.3. Once your controller has confirmed that the device has beenincluded, refresh the Z-Wave network to optimize performance.
Transform any home into a smart home with the JascoZ-Wave In-Wall Smart Outlet. The Jasco Z-Wave Smart Outlet enables wireless control of on/off functions from the Z-Wave controlled outlet, and is compatible with incandescent, LED, Xenon, Halogen, fluorescent and compact fluorescent bulbs. The duplex receptacle includes a blue LED indicator light to easily locate the receptacle in a dark room. The receptacle replaces your current electrical outlet, uses your existing wiring and provides a Z-Wave enabled outlet for the lamp or appliance that you would like to control and a standard pass-through AC outlet for other electrical appliances. The receptacle requires in-wall installation with hardwired connections. Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls! Z-Wave is the worlds largest ecosystem of interoperable smart home products. Z-Wave lighting controls provide an easy-to-install and affordable system to control lighting and small appliances in your home. Add GE Z-Wave lighting controls to a Z-Wave certified gateway to access and control your home from anywhere in the world using your smartphone, tablet or computer as a home automation command center. Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. Create customized lighting scenes for any occasion such as a go to sleep scene or a movie night scene. Give the illusion that someone is home by programming the lights to turn on/off while you are awayperfect for deterring crime and adding additional security!
Reset to factory default | Press and hold the button for at least 3 seconds. The LED lightwill blink 5 times to confirm.Note: This should only be used in the event your networksprimary controller is missing or otherwise inoperable. |
Inclusion | 1. Follow the instructions for your Z-Wave certifiedcontroller to include a device to the Z-Wave network.2. Once the controller is ready to include your device, press andrelease the Program Button to include it in the network.3. Once your controller has confirmed that the device has beenincluded, refresh the Z-Wave network to optimize performance. |
Exclusion | 1. Follow the instructions for your Z-Wave certified controller toexclude a device from the Z-Wave network.2. Once the controller is ready to Exclude your device, press andrelease the manual/program button on the smart dimmer toexclude it from the network. |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Z-Wave Plus Lifeline, Binary Switch report |
2 | 5 | Supports Basic Set and is controlled with the local load |
3 | 5 | Supports Basic Set and is controlled by double pressing the On or Off button |
Invert LED Light Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | Default |
1 | LED light on when Z-Wave tuned on |
2 | LED always off |
Hardware Platform | ZM5202 |
Device Type | On/Off Power Switch |
Network Operation | Always On Slave |
Firmware Version | HW: 255 FW: 5.20 |
Z-Wave Version | 6.51.06 |
Certification ID | ZC10-16105279 |
Z-Wave Product Id | 0x0063.0x4952.0x3039 |
Neutral Wire Required | ok |
Color | White |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |