Jasco Products Company
In-Wall Smart Dimmer (1000W)
SKU: 14326
Quickstart
This is a
Adding your device to a Z-wave network1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wavenetwork.2. Once the controller is ready to include your device, press and release the top or bottom of thewireless smart switch(rocker) to include it in the network.3. Once your controller has confirmed that the device has been included, refresh the Z-wave networkto optimize performance.Please reference the controllers manual for instructions.Now you have complete control to turn your fixture ON/OFFaccording to groups, scenes, schedulesand interactive automations programmed by your controller.If your Z-wave certified controller features Remote Access, you can now control your fixture fromyour mobile devices.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
Transform any home into a smart home with the Jasco Z-Wave Smart Dimmer. The In-Wall Smart Dimmer can easily replace any standard in-wall switch and remotely controls a light in your home. Your home will be equipped with ultimate flexibility with the Jasco Z-Wave Smart Toggle Dimmer, capable of being used by itself or with up to four add-on switches. Screw terminal installation provides improved space efficiency when replacing existing switches and the integrated LED indicator light allows you to easily locate the switch in a dark room. The Jasco Z-Wave In-Wall Smart Dimmer is compatible with any Z-Wave certified gateway, providing access to many popular home automation systems. Take control of your home lighting with Jasco Z-Wave Smart Lighting Controls! Z-Wave is the worlds largest ecosystem of interoperable smart home products. Z-Wave lighting controls provide an easy-to-install and affordable system to control lighting and small appliances in your home. Add GE Z-Wave lighting controls to a Z-Wave certified gateway to access and control your home from anywhere in the world using your smartphone, tablet or computer as a home automation command center. Never worry if you accidentally left the lights on because you can turn them off remotely or program your lights to go on/off at specific times. Create customized lighting scenes for any occasion such as a go to sleep scene or a movie night scene. Give the illusion that someone is home by programming the lights to turn on/off while you are awayperfect for deterring crime and adding additional security!"
| Reset to factory default | To return your switch to factory defaults:Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three(3) times. The LED will flash ON/OFF 5 times when completed successfully.Note: This should only be used in the event your networks primary controller ismissing or otherwise inoperable. |
| Inclusion | Adding your device to a Z-wave network1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wavenetwork.2. Once the controller is ready to include your device, press and release the top or bottom of thewireless smart switch(rocker) to include it in the network.3. Once your controller has confirmed that the device has been included, refresh the Z-wave networkto optimize performance.Please reference the controllers manual for instructions.Now you have complete control to turn your fixture ON/OFFaccording to groups, scenes, schedulesand interactive automations programmed by your controller.If your Z-wave certified controller features Remote Access, you can now control your fixture fromyour mobile devices. |
| Exclusion | 1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wavenetwork.2. Once the controller is ready to Exclude your device, press and release the top or bottom of thewireless smart dimmer (rocker) to exclude it from the network. |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 1 | Z-Wave Plus Lifeline |
Configuration Parameters
Parameter 10: Dim Rate Adjustments When manually controlling dimming
Dim Rate Adjustments When manually controlling dimming.For values over 127, consult your controller's user guide; some controllers may require values above 127 to be entered using the 2's Complement value or using Hexadecimal notation. Size: 1 Byte, Default Value: 3
| Setting | Description |
|---|---|
| 1 - 255 | timing of the steps |
Parameter 11: Dim Rate Adjustments When receiving an All-On or All-Off command
Dim Rate Adjustments When receiving an All-On or All-Off command Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 - 99 | number of steps or levels |
Parameter 12: Dim Rate Adjustments When receiving an All-On or All-Off command
Dim Rate Adjustments When receiving an All-On or All-Off command. For values over 127, consult your controller's user guide; some controllers may require values above 127 to be entered using the 2's Complement value or using Hexadecimal notation. Size: 1 Byte, Default Value: 3
| Setting | Description |
|---|---|
| 1 - 255 | Timing of the steps |
Parameter 3: LED Light
When shipped from the factory, the LED is set to turn ON when the connected light is turned OFF. This is the default setting and can be changed if your primary controller supports the node configuration function. To make the LED turn ON when the light is turned ON, change parameter 3s value to 1. To turn the LED OFF at all times, change parameter 3s value to 2. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 1 | LED light on when on |
| 2 | LED light at all times |
| 0 | Default |
Parameter 4: Invert Switch
If the switch is accidentally installed upside down with On at the bottom and Off at the top, the default On/Off rocker settings can be reversed by changing parameter 4s value to 1. Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 1 | Invert |
| 0 | Default |
Parameter 7: Dim Rate Adjustments When receiving a Z-Wave Dim Command
number of steps or levels Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 - 99 | number of steps or levels |
Parameter 8: Dim Rate Adjustments When receiving a Z-Wave Dim Command
Timing of the steps. For values over 127, consult your controller's user guide; some controllers may require values above 127 to be entered using the 2's Complement value or using Hexadecimal notation. Size: 1 Byte, Default Value: 3
| Setting | Description |
|---|---|
| 1 - 255 | Timing of the steps |
| 0 | Instant |
Parameter 9: Dim Rate Adjustments When manually controlling dimming
number of steps or levels Size: 1 Byte, Default Value: 1
| Setting | Description |
|---|---|
| 1 - 99 | number of steps or levels |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | Light Dimmer Switch |
| Network Operation | Always On Slave |
| Firmware Version | HW: 255 |
| Z-Wave Version | 6.51.06 |
| Certification ID | ZC10-15060023 |
| Z-Wave Product Id | 0x0063.0x4944.0x3136 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |