Quickstart
This is a
Repeater for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
To add this device to your network execute the following action:
The Lowe's IRIS Smart Plug acts as a repeater for other Z-Wave devices.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
The IRIS Smart Plug introduces new functionality to existing appliances and lighting devices. By placing the Smart Plug between an outlet and any appliance in your home, you can instantly add advanced automation features. Not only can the Smart Plug be switched on and off remotely, but it also can be used with your existing ZigBee hub to respond to alerts, schedules, and scenes. The Smart Plug can also report its power usage for energy management. The IRIS Smart Plug is an affordable way to add automation and track the energy use of your home while acting as a repeater for other ZigBee and Z-Wave devices.
Reset to factory default |
Unplug device from the wall.While holding the front button, re-insert device into the receptacle. Once the blue light illuminates, release button to factory reset.Use this procedure only in the event that the network primary controller is missing or otherwise inoperable. |
Inclusion |
The Lowe's IRIS Smart Plug acts as a repeater for other Z-Wave devices. |
Exclusion |
Power off device by unplugging it from its receptacle. |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Association Groups:
Group Number |
Maximum Nodes |
Description |
1 |
5 |
Z-Wave Plus Lifeline |
Technical Data
Hardware Platform |
ZM5202 |
Device Type |
Repeater |
Network Operation |
Always On Slave |
Firmware Version |
01 |
Z-Wave Version |
6.51.06 |
Certification ID |
ZC10-16040001 |
Z-Wave Product Id |
0x0246.0x0001.0x0001 |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |