Aeotec
Aeotec Water Sensor Dock
SKU: AEOEZW160
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
With the Water Sensor 6 of Aeotec you are protected against water damages. This device is already greatful but with the Water Sensor Dock it becomes more greatful.The installation of the dock offers several advantages to you. Firstly you have got the opportunity to monitor two different areas in a distance of 1m from the water sensor. Connect the two spot sensors to the dock and then you can monitor separate areas. So you enlarge also the level of secrurity. Secondly you can use the dock as loading station of the water sensor to power it with mains electricity. Connect the provided USB cable to the dock and the Water Sensor 6 does not longer need the batteries.
Features:
- Docking station of Water Sensor 6
- Extends the range about 1m away from the Water Sensor 6
- Two separate areas can controlled by two spot sensors
- Loading with USB cable
Download high resolution images for Aeotec products.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0360000x0.1010000x0.0310000 mm |
| Weight | 89 gr |
| EAN | 1220000015760 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |