Aeotec
Z-Wave Multisensor
SKU: AEORZW074
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Aeon Labs Multi Sensor is a USB or battery-powered Z-Wave motion sensor, temperature sensor, humidity sensor and lighting sensor in one package. The sensor will send radio signals up to 6 associated Z- Wave devices within its own Z-Wave network when the sensor detects IR changes in front of its viewing window.
This device support secure communication when included by a controller that also supports secure communication. The device will then send all commands as secure commands unless the receiving device can not accept them. Then the command is send the normal way automatically.
Important: At this time the sensor is not fully supported by Fibaro and Vera.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0000000x0.0000000x0.0000000 mm |
| Certification ID | ZC10-14120004 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |