Aeotec
Z-Wave Clamp Power Meter - three clamps(200A)
SKU: AEO_HEM3-200A
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone. Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house.
The main body is anchored using a back mount which can be opend easily for battery replacement (every year). Optionally its possible to power the unit from a normal AC power supply. The device has three clamps and reports W and kWH (up to 200 Ampere).
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0640000x0.1000000x0.0380000 mm |
| Weight | 330 gr |
| EAN | 1220000011649 |
| Certification ID | ZC08-13040001 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |