This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
You want to design your home smart and are looking for a suitable starter package? Smart Home is a term to you, but you have questions about the selection of products? Then we have the solution for you here. With the Aeotec SmartThings Starter Kit you get an perfect all-round package for getting started in the smart home world.
Get a 360° view of your rooms at a glance with the full HD camera Aeotec Cam 360° to display you a detailed view of what is going on at home at day or night. Get alerted about open windows and doors with the Aeotec Multipurpose Sensor and turn on compatible lights by motion detection with the Aeotec Motion Sensor. And with the Outlet F you can turn off your electrical devices when you go to bed. The Aeotec SmartThings Hub is the central connection and is the intelligent brain of your Smart Home. Your smart devices are controlled - in combination with Amazon Alexa and Google Assistant - directly by voice or with the free app for iOS, Android and Windows 10.
Which products are included at the Starter Kit?
Aeotec Smart Home Hub
The Aeotec Smart Home Hub allows you to connect wirelessly to a wide range of compatible smart devices such as lights and sensors.
Aeotec Cam 360°
With the Aeotec Cam 360° you are at home with just a view to keep an eye on what matters, even when you are away. The customisable coverage area gives you uninterrupted security.
Aeotec Motion Sensor (Zigbee)
The Aeotec Motion Sensor can be easily integrated into your home thanks to its compact dimensions, to register unexpected movements. In addition to motion detection, you can also automate connected devices.
Aeotec Multipurpose Sensor (Zigbee)
The Aeotec Multipurpose Sensor can be easily installed on doors and windows, to inform you when doors and windows are open unexpectedly.
SmartThings Outlet Type F (Zigbee)
The SmartThings Outlet is simply connected between the normal socket and the plug of the device, which should be controlled. So you will be able to switch your electrical devices on or off and integrate them into your Smart Home.
Download high resolution images for Aeotec SmartThings products.
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
EAN | 4251295740959 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |