Shelly (Allterco Robotics LTD)

Shelly Plus 1PM Mini

SKU: ALRLMINIPLUS1PM


Quickstart

This is a Z-Wave Device for . To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Wi-Fi-operated smart switch, 1 channel 8A, with Power Metering?.
?The smallest relay switch in the world for smart control and precise power monitoring. Automate your lights or small electrical appliances in less than 10 minutes, and control and monitor them from anywhere. Small enough to fit behind any wall switch or socket, Shelly Plus 1PM Mini is retrofit and highly compatible with your existing smart ecosystem.?

?No Hub required!
Easy control through the Shelly Smart Control app, most platforms and protocols, as well as voice assistants.
Use it with Alexa, Home Assistant or your preferred automation platform?
Supports up to 8 A at 240 VAC?
Wi-Fi range extender & Bluetooth gateway
Precise and real-time power metering with free cloud data storage for analysis and energy usage optimization.?
Extremely fast processor for immediate reaction - ESP32?
Supports scripting, webhooks, MQTT, WebSocket, HTTPS, UDP, TLS and custom certificates

WHY SHELLY PLUS 1PM MINI?
Mini Size, Mini Price.
Designed with convenience in mind, these mini relays have all the capabilities of the Plus series fit into a compact and space-saving form factor. With their size reduced by 35% of the Shelly Plus devices, the Shelly Plus Mini are perfect for those tight spaces where traditional relays simply won"t fit. Despite their small size, the Shelly Plus Mini devices don"t compromise on performance or functionality.

Wi-Fi Operated.
Connect Shelly Plus 1 Mini to your Wi-Fi network. No HUB required!

Bluetooth.
Quick inclusion via Bluetooth or use it as a Bluetooth gateway.

Power Monitoring.
Provides precise monitoring of power consumption and helps you save.

Smart Schedules.
Set custom schedules based on your daily agenda or follow the sunrise/sunset and control your lighting accordingly.

Smart Scenes.
Set custom scenes by combining Shelly Plus 1 Mini with your other Shelly devices.

Scripting.
Shelly Plus 1 Mini fully supports mjS scripting, allowing you to create custom features and functionalities.

Use cases.
Track your power consumption and save money?.
?Tailored for measuring the power consumption of appliances up to 8A, Shelly Plus 1PM Mini is perfectly suited for monitoring smaller devices, including personal electronics, fans, lighting fixtures, and kitchen gadgets. By using it to monitor power consumption, you can manage energy usage and make informed adjustments to reduce electricity costs. Shelly Plus 1PM Mini offers free data storage, providing access to historical data for analysis and comparison, which can also help you identify devices consuming excessive power or working unnecessarily.

Make any small electrical appliance smart.
?Transform old electrical appliances, like small heaters or kitchen gadgets into smart devices with Shelly Plus 1PM Mini. It provides precise power monitoring, allowing you to track energy consumption in real-time, and gives you remote control over appliances, no matter where you are. You can wire it behind your socket or even inside the appliance"s casting. Create custom schedules for your appliances based on your daily routine to save energy and set smart scenes to be prepared for any unexpected occurrences in your home!

Shelly Plus line features.
HTTP/HTTPS webhooks.

Shelly Plus devices can notify or control another compatible equipment or 3rd party automation system.

Scripting for custom automation.
Get enhanced functionalities and additional processes settings for a specific integration or function you have in mind.

Weekly scheduling automation.
Create a home automation that follows your schedule! Shelly Plus allows you to quickly set actions based on your daily or weekly schedule.

Smart actions for dynamic control.
Set Shelly Plus devices to switch on/off the power, based on the Sunset/Sunrise hour and enjoy dynamic control depending on the season.

Shelly Smart Control is here!
One app to control your spaces, energy consumption, and expenses. 

Full compatibility.
Shelly devices are compatible with Alexa, Google Home, Android and iOS. Together with the voice assistant, you can command Shelly devices using just your voice! 

Features:

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.0290000x0.0340000x0.0160000 mm
Weight 17 gr
EAN 3800235265666
Frequency XXfrequency
Maximum transmission power XXantenna

Explanation of Z-Wave specific terms