Aqara

Aqara Water Leak Sensor T1

SKU: AQAZWL-S02D


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Aqara Water Sensor T1 meets IP67 requirements (waterproof and dustproof). It can be placed in humid and dusty environments.

Fits anywhere.
The Aqara water sensor T1 can be placed anywhere and protects your home with its elegant design.

Smart control in the Apple Home app.
Compatible with other HomeKit-enabled accessories in the Apple Home app to make your life easier.

Aqara home automation.
Together with other smart accessories, you can create different scenes. Even if the Wi-Fi connection is unstable or disconnected, the automations connected to this product will work properly as long as the hub is powered.

Close the water valve to protect your property.
Upon detecting a leak, the Aqara Water Sensor T1 triggers the smart outlet to immediately turn off the magnetic water valve.

Triggers an alarm when flooding is detected.
When the water level reaches 0.5mm, the water sensor triggers an alarm at the hub and sends a notification to your phone.

Technologically advanced.
The device is made of UV-resistant material that prevents colour fading, allowing for long-term use. It consumes little energy, and a button battery lasts over 2 years under normal circumstances.

Features:

  • Radio technology: Zigbee 3.0
  • Battery type: CR2032
  • Battery life: up to 2 years
  • Operating temperature: -10°C - +55°C
  • Humidity: 0 - 100% RH
  • IP protection class: IP67
  • Homekit: Aqara Hub required

 
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0500000x0.0500000x0.0150000 mm
Weight 17 gr
EAN 6975833352142
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device