Danfoss LC-13 Thermostatic Radiator Valve

Product Description

The LC-13 by Danfoss is a Z-Wave controlled electronic radiator thermostat. It is applied to be mounted on wall heating valves and controls them by a motor. The device accepts a set point that is either set manually using local buttons on the device or wirelessly using Z-Wave. Beside setting a desired temperature the device will support special heating schemes, such as energy saving and frost protection. A small LCD display on the device shows the target temperature on request.

The device owns further intelligent functions such as detection of open windows or a valve training function to ensure that valves are still operational after longer periods.  

The Danfoss LC-13 thermostat can be mounted with few movements to valves with standard M30x1.5 connector or RA2000 (Danfoss snap in). The device expects a regular radio connection to the IP gateway for status message exchange.

Features:

• Thermostat for water-based radiators
• Local control buttons
• LCD display (target temperature)
• For valves with standard M30x1.5 connector (30x1,5) or RA2000 (Danfoss snap in). 
• Low-noise motor
• Child protection
• Wireless Technology: Z-Wave

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

• broken seal,
• damaged packaging,
• no original packaging
• missing accessories,
• minimal signs of wear,
• no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.