Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Increase the comfort and save energy simultaneously. With the Comet-Z thermostat, radiators will become important modules of your home automation. Intelligent connected to various sensors and individual heating schedules, you will heat only when it’s needed and only to your defined comfortable temperature. Additionally, the heating process will be stopped automatically, as soon as a window will be opened. Or you can activate the heating from outside, if you are on the way home earlier than expected.

The Comet-Z can be controlled via local adjusting wheel and – thanks to Z-Wave – by a smart home control center. Set the room temperature from your smartphone: It does not matter if you are on your couch or on the way. Of course, you can define scenes and heating schedules in your smart home gateway which regulate the temperature fully automatic time and sensor controlled.

The installation does not require any tools and can be performed without any further knowledge in no time: Just take off the conventional thermostat and install the Comet-Z. No need to drain water. Adapters for most common valves are enclosed in the package (Danfoss RA, Danfoss RAV, Danfoss). Further adapters can be re-ordered.

Features: 

  • Thermostat for water-based radiators
  • Adjusting wheel for manual changes of the room temperature
  • LCD display (set temperature)
  • Allows individual heating program for every day
  • Quiet operation
  • „Open window“ detection
  • Frost protection
  • Limestone protection
  • Easy installation
  • Fits on most common valves (e.g. Heimeier, Danfoss, Honeywell Braukmann, Honeywell MNG, Oventrop since 1996, and others)

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0530000x0.0850000x0.0600000 mm
Weight 110 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device