Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

How often does it happen that one of family members forgets to turn off the light? Motion Sensor integrated with lighting system is a simple way to save the energy. Lamps will automatically turn on when someone enters the room and turn off when no movement is detected.

The FIBARO Motion Sensor is a highly advanced, ultra small multi-sensor. Motion Sensor honored with CES 2015 Innovation Awards and International Design Awards 2015. This tiny sensor has a built-in temperature sensor, light sensor and accelerometer. The eye of the sensor shines with user-defined colors to visually alert when detects motion and alarm. The Motion Sensor is completely wireless and mobile. It can even turn the lights on when you enter that room!

  • Plug and Play extremely easy installation on surface without drilling and cabling
  • Detects every motion and allows lighting controls and heating measuring
  • Possibility to Integrate with alarm or fire prevention system
  • Measures the temperature
  • Compatibles with any Z-Wave controller
  • Alarms of movement and temperature are signaled by LED diode
  • blinking
  • Simple earthquake detector mode

Technical Details

  • Wireless technology: Z-Wave
  • 4-in-1 Sensor: Motion, temperature, accelerometer and lighting level
  • PIR: 7mm detection and 2.4 recommended installation height
  • Temperature: 0 to +40°C (±0.5°C)
  • Light: 0 - 32,000Lux
  • Tamper Alarm: Yes
  • Push-button: Wake-up, inclusion and exclusion
  • Rating: Dry (Indoor) conditions
  • Power: 1x CR123A (3.6V) battery (supplied)
  • Dimensions: 44 mm (dia)

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.  

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0470000x0.0470000x0.0470000 mm
Weight 20 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device