FIBARO
FIBARO Walli Switch
SKU: B_FGWDSEU-221B
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
With the FIBARO Walli Switch you can switch off the light even when you are not at home. The small flush-mounted module is combined with an optically appealing switch which can be used to switch one or two light sources.
The small FIBARO Walli Switch measures the active power and the energy consumption. With its LED ring you are informed about the current energy consumption.
The installation is easy and can be carried out according to your individual wishes. Use the included switch or your own switch series (GIRA System 55**, Legrand Celiane, Schneider Odace).
The FIBARO Walli Switch can be used for the following luminaires:
- conventional incandescent lamps and halogen lamps
- LED lamps
- fluorescent lamp
- electronic transformers (for ELV halogen lamps and LED light bulbs)
- ferromagnetic transformers (for MLV halogen lamps)
Features:
- switching one or two light sources
- Scene control
- Power supply: 110 - 230V, 50/60Hz
- Security: S2
- SmartStart enable
- Wireless technology: Z-Wave Plus
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 0.0860000x0.0860000x0.0520000 mm |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |