FIBARO

FIBARO Motion Sensor (HomeKit)

SKU: B_FIB_FGBHMS-001


Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The FIBARO Motion Sensor is a HomeKit-enabled multi-sensor using Bluetooth® low energy technology. Along with detecting motion, the accessory measures the ambient temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering with the accessory. The FIBARO Motion Sensor is battery powered and designed to be installed quickly and easily on any surface. The eye-shaped LED indicator signals motion, temperature level, tampering and can be used to identify the accessory.

Features:

  • Compatible with Apple HomeKit technology
  • Bluetooth® low energy technology for wireless communication
  • Detects motion using a passive IR sensor
  • Measures ambient temperature
  • Measures light intensity
  • Detects tampering using accelerometer
  • Easy to install anywhere - on a wall or any surface
  • Battery-powered
  • Indicates state using multicolor LED diode

Technical Data:

  • Power supply: 3.0V DC battery
  • Battery type: CR123A
  • EU directives compliance: R&TTE 1999/5/EC; RoHS 2011/65/EU
  • Radio protocol: Bluetooth® low energy
  • Radio frequency: 2.4 GHz
  • Range: up to 50m (free range) (164 feet)
  • Recommended installation height: 2.4 meters (7.87 feet)
  • Operating temperature: 0-40°C (32-104°F)
  • Temperature measuring range: 0-40°C (32-104°F)
  • Temperature measuring accuracy: ±0.5°C (±0.9°F)
  • Light intensity measuring range: 0-32000 lux
  • Dimensions (diameter): 46 mm (1.8 inches)

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.
Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0280000x0.0720000x0.0720000 mm
Weight 24 gr
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device