Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Qubino Smart Meter is an extremely versatile and powerful Z-Wave module for measuring energy in a single-phase electrical power network of up to 65A. A built-in microprocessor calculates e reactive energy, the power and the power factor with the measured signals. The Smart Meter is designed that it can be mounted on a DIN rail.

The Qubino Smart Meter can be used in residential, industrial and utility applications. It permanently measures the current and the current voltage directly in an AC circuit. It calculates the current and the total power, the power factor PHI and the reactive energy currently consumed. It also acts as a repeater in order to improve the range and stability of the Z-Wave network. The control via Z-Wave makes it possible to control separately available relays and to evaluate the measurement results of devices.

Features:

  • Z-Wave Plus
  • Secure 2
  • EU frequency: 868.42 MHz
  • Package content: 1x Qubino Smart Meter

Main terminals (LI,NI,Lo,No)

  • Contacts capacity: 1.5...16(25)mm2
  • Connection screws: M5
  • Max torque: 3.5 Nm

Optional terminals (1,2,4,5)

  • Contact capacity: 0.05 … 1 (2.5) mm2
  • Connection screws: M3
  • Max torque: 0.6 Nm

Measuring input

  • Type (connection): single phase (1b)
  • Reference current (Iref): 5 A
  • Maximum current (Imax): 65 A
  • Minimum current (Imin): 0.25 A
  • Starting current: 20 mA
  • Voltage (Un): 230 V (±20%)
  • Power consumption at Un: < 2 W
  • Nominal frequency (fn): 50 and 60 Hz

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0360000x0.0900000x0.0690000 mm
Weight 140 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device