Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Qubino Weather Station is a complete package with various components which detect different weather data. Beside the plain sensor information, the weather station enables to create automation scenes in the connected home. That makes life more comfortable and increases safety for residents and the home itself. 

Die Qubino Wetterstation besteht aus:

  • Wind sensor
  • Rain gauge
  • Air sensor (indoor)
  • Air sensor (outdoor)
  • Transmitter stick (USB)

In total, the weather station provides 10 essential values:

  • Wind direction
  • Wind speed
  • Gust
  • Wind temperature
  • Chill
  • Rain (amount)
  • Temperature (indoor and outdoor)
  • Humidity (indoor and outdoor)

The weather station‘s sensors are equipped with 433MHz radio, which will be converted with the supplied wireless stick into Z-Wave signals. Use these sensor values to close the awnings, shutters and windows automatically when storm arises or the weather station detects rain. Additionally, the air sensors report (on local display and via radio to the control center) temperature and humidity values indoor and outdoor. Therewith, you will always know if you need warmer cloths for going outdoor. And you can air your home in time when the sensors detect increased humidity – e.g. in the bathroom or kitchen.

Features: 

  • Complete weather station with 4 sensors
  • Rain gauge
  • Wind sensor
  • Indoor and outdoor sensors for temperature and humidity (with LCD display)
  • Provides up to 10 sensor values
  • USB stick transmits sensor values into the Z-Wave network
  • Wireless Technology: 433MHz / Z-Wave Plus
  • Dimensions (Total Packaging): 460 x 120 x 430 mm

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.4300000x0.4300000x0.2600000 mm
Weight 1060 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device