Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Greenwave"s PowerNode is an intelligent plug adapter which has to be placed between a wall outlet and an electronic device. It can measure the connected device&rsquos energy consumption and report to a smart home controller or gateway. Furthermore it is possible to control the PowerNode adapter plug from afar via web browser, smartphone, tablet pc and time plan automation as well.

Thanks to Z-Wave wireless technology PowerNode is compatible to most smart home gateways in the market – i.a. Fibaro Home Center 2, Home Center Lite, Zipabox, Z-Way on RaZberry or WD SmartHome System.

A small wheel on the adapter plug&rsquos side can be used to adjust it to a color indicating belonging to a defined device group or room area. This little trick enables you to distinguish different PowerNode adapter plugs within your home. It is also possible to set the wheel to “lock” (padlock symbol). This function blocks the smart home gateway&rsquos access and prevents from inadvertently shut-off.

The Greenwave PowerNode has a bright status display for different information depending on its color: on, off, limited wireless range, inclusion and exclusion.

In addition the device is equipped with overcurrent protection securing the device itself and the connected device as well. The device&rsquos output will be deactivated in case of a defective device or an electrical short. Additional protection comes from internal fuse.

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0600000x0.1200000x0.0700000 mm
Weight 140 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device