Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

**Updated version: This thermostat has the latest firmware version: 3.0 and replaces the previous version. With the new firmware version you have control over more parameters like minimum or maximum temperature level. For more information check out the manual of the latest version.**

The MCOEMH8-FC thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is destined for central control of a 2-pipe fan coil, which influences room climate by heating, cooling, humidify and dehumidify. The device can read room temperature and local time, and automatically control fan speed based on the temperature difference.

The wall thermostat MCOEMH8-FC requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.

With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc,

Features:

  • Central control of 2-pipe fan coil
  • Tempered glass panel (white) with capacitive buttons
  • Clear display with basic control information
  • Cooling, Heating and Ventilation modes
  • Intelligent on/off control of 3-speed fan, and electric valve
  • Flush mounted in 86x86mm junction box
  • Wireless technologie: Z-Wave Plus

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0860000x0.0860000x0.0390000 mm
Weight 240 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device