Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

There are a lot of potential fire sources in your own four walls, for example open fire such as candles or a fireplace. Also an iron, cooking utensils or numerous other electrical devices can cause fire. Smoke detectors can save lives. In case of a fire or smoke emission every second counts giving the chance to extinguish the fire or to get somebody or themselves out of harm"s way. 

The POPP smoke detector detects resulting fire and smoke emission reliable. In case of emergency it alarms acoustically and sends the alarm signal to all other POPP smoke detectors in range. That ensures that the alarm reaches people in all floors as well as in the night while they are sleeping.

Thanks to Z-Wave wireless technology, you can define further actions triggered by the smart home control center in case of an alarm. To enhance safety, escape routes can be highlighted through automatic lighting, opening shutters and unlocking doors. If an electrical device (e.g. iron) is the causer for the alarm, it can be switched off automatically (if plugged to an intelligent wall plug).

Beyond these functions, the Z-Wave smoke detector can be used as an independent indoor siren which can be integrated into an existing security system. Within your Z-Wave smart home network the smoke detector can be connected to other sensors such as door and window contacts or motion sensors independently from a control center. In case of an alarm, the acoustic signal will be different from the signal in case of fire.

Features:

  • 2-in-1 smoke detector with indoor siren
  • Detects smoke and fire
  • Automatic meshing between all POPP smoke sensors (POPE004001) in range
  • Independent use without smart home control center possible
  • Easy installation
  • Automatic self-calibration and self-test
  • Additional function as independent indoor siren (e.g. burglary or flood alarm)
  • Power Supply of radio module: Mains power (with optional available mains adapter) or battery
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 106 x 106 x 35 mm

Accessories:

  • External mains adapter for permanent current (POPE004100).

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.1060000x0.0350000x0.1060000 mm
Weight 140 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device