Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

Overflowing bathtubs, leaking washing machines or defects to gas and water pipelines – damages can occur almost anywhere and cause immense costs. The POPP Flow Stop can prevent this – thanks to Z-Wave.

Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave technology. This means it is particularly suitable for use in smart homes.

Even installation is child’s play. The POPP Flow Stop is delivered completely including valve control/motor, power supply, mounting and Quick Start Guide. It is easy to assembly on an existing ball stop valve. In doing so, all usual pipe standards, including ½" and ¾“, are possible. On this occasion, no pipes must be dismantled or even water must be drained. That way the installation is normally done in 5-10 minutes. 

As of now, you can turn off the water also from outside via mobile device – or automatically, e.g. if a water sensor detects a leaking pipeline. It doesn’t matter if you install the Flow Stop on your washing machine’s water conduit or use it for garden irrigation – the POPP Flow Stop will make your home safer and more comfortable.

Only the POPP Flow Stop supports the Security Command Class and owns security features, which are not supported by comparable devices.

  1. Communication to the Flow Stop is secured with encryption. This does not only protect the device against burglars that want to do harm to the home (e.g. waste water by opening the valve to watering system). It’s also protecting better against jamming of the communication link.
  2. Configuration of the local LED: The user can decide if the blue LED shall indicate open or close state
  3. Unsolicited report of any state change of the Flow Stop to the controller.
  4. Second communication channel to report manual operation of the device. Here up to 5 other devices can be operated independent of the controller.
  5. The remote operation of the device can be limited to ‘only open’, ‘only close’ or ‘no remote control’ to protect against malfunction.

Features:

  • Shut-off controller for automatic gas and water pipe flow regulation 
  • Easy installation on a ball valve (water doesn’t have to be drained)
  • For all usual pipe standards, including ½“ and ¾“ 
  • Supports secure communication (Security Command Class)
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 93 x 70 x 77 mm
  • IP class: IP64

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0740000x0.0830000x0.1480000 mm
Weight 556 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device