Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The dual paddle dimmer switch by TKB Home is a wall switch with integrated relay and 2 rocker buttons. The relay can switch and dim one electrical load with up to 300 watts. With the left rocker button or via Z-Wave radio, you can switch and dim the connected load. Besides, further actions within the Z-Wave network can be triggered via single and double click by the right switch button.

The wall switch can be easily connected to an electrical load without installing a flush mounted module separately. The relay is located inside a module which is directly connected to the wall switch with the paddle. With that TKB Home wall switch you can replace any switch insert or toggle switch. The wall switch can be mounted on any flush box.

With TKB Home wall switches and dimmers you can easily integrate your already installed lights into your home automation network. Without installing any news cable, you can switch your lighting as usual via wall switch – but thanks to Z-Wave technology also via remote control, smartphone or sensor-controlled automation. 

Features:

  • Dimmer switch with integrated relay for wall installation 
  • Single switch button
  • Inclusive frame with cornered edges
  • Replaces complete wall switch (dimmer)
  • Relay with 300 W / 230 V AC each
  • Integrated LED for indication on both paddles
  • Works with single and double click
  • Standby power consumption: <0.8 W
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 80x80x38 mm

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0850000x0.0850000x0.0370000 mm
Weight 92 gr
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device