This is a
Plug this module into a wall outlet near the load to be controlled. Plug the load into the module and switch the load to the ON position. To turn ON the module and the load plugged into it, press and release the ON/OFF button of the module. Inclusion and Exclusion are confirmed by a tripple click of the button of the device.
The Everspring AN1572 is a switch plug that can be placed between a type F plug and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A red LED indicates the switching status.
The Everspring Switch Plug AN1572 can be plugged into every type F wall outlet. It is IP20 rated and can therefore only be used in dry environments. Do not locate the Module facing direct sunlight, humid or dusty place. The suitable ambient temperature for the Module is 0°C ~ 40°C.
The device is able to switch all loads up to 3500 W. Any load above 3500 W is considered as overloading. Switching is controlled wirelessly using Z-Wave or directly over the ON/OFFbutton of the Plugin Switch.
A red LED indicates the switching status.
Reset to factory default | XXXResetDescription |
Inclusion | tripple click of the button of the device. |
Exclusion | tripple click of the button of the device. |
NIF | tripple click of the button of the device. |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Dimensions | 0.0050000x0.0100000x0.0070000 mm |
Weight | 140 gr |
Hardware Platform | ZM3102 |
IP Class | IP 20 |
Voltage | 230 |
Load | 3500 |
Device Type | On/Off Power Switch |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Firmware Version | 01.02 |
Z-Wave Version | 02.40 |
Certification ID | ZC08-09070011 |
Z-Wave Product Id | 0060.0004.0001 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |