Quickstart

This is a Binary Power Switch for XXXQFrequencyName. To run this device please connect it to your mains power supply.

Plug this module into a wall outlet near the load to be controlled. Plug the load into the module and switch the load to the ON position. To turn ON the module and the load plugged into it, press and release the ON/OFF button of the module.

Inclusion and Exclusion are confirmed by a tripple click of the button of the device.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The Everspring AN1573 is a switch plug that can be placed between a British Standard wall outlet for Plug-Type G and electric devices, plugged in by cord. It can switch all loads up to 3500 W. The device is IP 20 rated and can therefore only be used in dry environments. Switching is controlled wirelessly using Z-Wave or locally applying a button. A red LED indicates the switching status.

Installation

The Everspring Switch Plug AN1573 can be plugged into every British wall outlet for Plug-Type G. It is IP20 rated and can therefore only be used in dry environments. Do not locate the Module facing direct sunlight, humid or dusty place. The suitable ambient temperature for the Module is 0°C ~ 40°C.

Product Usage

The device is able to switch all loads up to 3500 W. Any load above 3500 W is considered as overloading. Switching is controlled wirelessly using Z-Wave or directly over the ?ON/OFF? button of the Plugin Switch.

A red LED indicates the switching status.

Reset to factory default XXXResetDescription
Inclusion

tripple click of the button of the device.

Exclusion

 tripple click of the button of the device.

NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0000000x0.1040000x0.0000000 mm
Weight 140 gr
Hardware Platform ZM3102
IP Class IP 20
Voltage 230V
Load 3500 W
Device Type On/Off Power Switch
Generic Device Class Binary Switch
Specific Device Class Binary Power Switch
Firmware Version 01.02
Z-Wave Version 02.40
Certification ID ZC08-09070011
Z-Wave Product Id 0060.0004.0001
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeOn/Off Power Switch