Fibaro Group
FIBARO Double Relay Switch
SKU: FIBRFGS-221
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The In-Wall Double Relay Switch is hereinafter referred to as Fibaro Switch. It is designed to switch on/off devices connected to its terminals using radio waves, controllers and push button directly connected to Fibaro Switch.
The remotely controlled Double Relay Switch of FIBARO system is designed to operate in a wall switch box, wall socket box or in locations where the control of any two electric devices (up to 1.5kW each) is needed. It is also possible to send a signal to any system that is to be integrated with FIBARO system.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 37x42x16 mm |
| Weight | 26 gr |
| Hardware Platform | ZM3102 |
| Device Type | On/Off Power Switch |
| Generic Device Class | Binary Switch |
| Specific Device Class | Binary Power Switch |
| Z-Wave Version | 4.52 |
| Certification ID | ZC08-11070003 |
| Z-Wave Product Id | 0x010F.0x0200.0x0102 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |