Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

FIBARO CO Sensor is a HomeKit-enabled carbon monoxide detector using Bluetooth® low energy wireless technology. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning. Alarm is signalled with a built-in siren, blinking LED indicator and by sending information to your iOS device. Additionally, the accessory is equipped with a temperature sensor.

Features:

  • Compatible with Apple HomeKit technology
  • Bluetooth® low energy technology for wireless communication
  • May be used as stand-alone carbon monoxide detector
  • Wall-mounted
  • Battery-powered
  • Completely wireless
  • Alarm signalled with a built-in siren and LED diode
  • Built-in temperature sensor

Technical Data:

  • Battery type: CR123A 3.0V battery (included)
  • Battery life: 3 years on default settings (tested with Panasonic Industrial Lithium)
  • Lifespan under typical conditions: 8 years
  • CO concentration measurement range: 0-450 ppm
  • Measuring accuracy: ±10ppm / ±5%
  • Operating temperature: 0-50°C (32-122°F)
  • Alarm response times on default settings: 50ppm 60-90min; 100ppm 10-40min;
  • 300ppm <1.5min
  • Alarm siren sound level: 85 dBA at 3 meters (10 feet)
  • EU directives compliance: R&TTE 1999/5/EC; RoHS 2011/65/EU; EN 60950-1
  • Radio protocol: Bluetooth® low energy
  • Radio frequency: 2.4 GHz
  • Temperature measuring range: 0-60°C (32-140°F)
  • Dimensions (diameter x height): 65 x 28 mm (2.5 x 1.1 inch)

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0170000x0.0080000x0.0350000 mm
Weight 40 gr
EAN 5902701700089
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device