Quickstart
This is a
Z-Wave Device for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Product Description
The FIBARO Flood Sensor is a HomeKit-enabled water sensor using Bluetooth® low energy technology. Along with detecting flooding, the accessory measures the ambient temperature. Tampering is detected whenever the accessory is moved or casing is opened. Built-in LED indicator and an acoustic alarm signal water detection and tampering. The LED can be also used to identify the accessory. The accessory is designed to be placed on the floor or mounted on a wall (in this case sensor should be extended using an external probe). The accessory is sink-proof, which means it drifts on the water surface and keeps sending an alarm signal in case of substantial flooding.
Features:
- Compatible with Apple HomeKit technology
- Bluetooth® low energy technology for wireless communication
- Detects flooding
- Detects tampering using accelerometer or when the casing is opened
- Easy installation - simply put on any surface prone to flooding
- May be installed anywhere - sensor can be extended using an external probe
- Battery-powered
- Indicates state using LED diode and buzzer
Technical Data:
- Power supply: 3.0V DC battery
- Battery type: CR123A
- EU directives compliance: R&TTE 1999/5/EC; RoHS 2011/65/EU • Radio protocol: Bluetooth® low energy
- Radio frequency: 2.4 GHz
- Range: up to 50m (free range) (164 feet)
- Operating temperature: 0-40°C (32-104°F)
- Measured temperature range: 0-40°C (32-104°F)
- Temperature measuring accuracy: ±0.5°C (±0.9°F)
- Dimensions (diameter x height): 72 x 28 mm (2.8 x 1.1 inch)
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Technical Data
Dimensions |
0.0280000x0.0720000x0.0720000 mm |
Weight |
33.78 gr |
EAN |
5905279987487 |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |