Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

FIBARO Wall Plug is a HomeKit-enabled smart plug using Wi-Fi connection and Bluetooth low energy wireless technology. This remotely controlled outlet adapter is equipped with an active power and energy metering function. It uses a LED ring to visualize current consumption and status. The Wall Plug may be operated using the button on the casing or via an iOS mobile app through Wi-Fi.

Features:

  • Compatible with Apple HomeKit technology,
  • Wi-Fi for wireless communication,
  • Detects if electrical device is connected to it,
  • Measures active power consumption,
  • Measures energy consumption,
  • easy installation,
  • indicates state and consumption using multicolor LeD ring

 

technical Details:

 

  • Power supply: 230V AC, 50 Hz
  • Rated load current: 10A - continuous load
  • Power output (for resistive load): 2300W - continuous load
  • To be used with E or F type (Schuko) sockets:
  • CEE 7/16 - max load 2.5A
  • CEE 7/17 - max load 10A
  • Dual type plugs E/F
  • EU directives compliance: RED 2014/53/EU; RoHS 2011/65/EU
  • Pollution Degree: 2 (home and office use, indoor only)
  • Radio protocol: IEEE 802.11n; Bluetooth® low energy
  • Radio frequency: 2.4 GHz
  • Transmit power: 14 dBm (Wi-Fi); 8 dBm (BLE)
  • Operating temperature: 0-40°C (32-104°F)
  • Temperature measuring range: 0-40°C (32-104°F)
  • Dimensions (diameter x height): 43 x 65 mm (1.7" x 2.56")
  • Safety classification rating: home and office use only 
  • Type 1 action according to features of automatic action as per clause 6.4.1 of EN 60730-1:2012 standard.
  • Software class A device, according to EN 60730-1:2012 standard.

 

Use Case:

1. Certainty - Now you do not have to go back to check whether you have turned off the iron, FIBARO WallPlug keeps an eye on plugged in devices.

2. Gentle illumination - The Wall Plug"s amazing LED ring illuminates with a pale blue or white light while it’s connected to the power outlet, which ideally plays a role of a bedside lamp.

3. Just in time - works on schedule

4. Parental control - control your children"s learning time or fun and automatically turn off potentially dangerous devices when you are not around.

5. Money-savings - With schedules of devices, it is possible to switch them on the night rate - when the fees are lower.

6. Smart management - Turns off in stand-by mode.

 

 

 

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0420000x0.0420000x0.0660000 mm
Weight 55 gr
EAN 5905279987852
Frequency XXfrequency
Maximum transmission power XXantenna
Z-Wave Device