This is a
Plug the device into a power outlet and set your controller into inclusion mode. If you are unsure how to do that please refer to your controller"s manual. Press the button on the bottom of the Smart Switch once to start the inclusion. The device will now try to include itself into the Z-Wave network. Please refer to your controller for a progress report.
The Foxx Smart Switch with power metering feature is an intelligent and most sophisticated, remotely controlled outlet adapter. This highly functional wall plug can be applied wherever you want to control electrical devices, while monitoring power consumption in a convenient and maintenance-free way.
Plug the device into the Wall Outlet
After the Foxx Smart Switch has been included into your Z-Wave network it can start controlling connected devices and monitoring the power consumption. That way you always know how much power the connected device is using and can switch it on or off as you see fit. You can define scenes in your controller"s settings that allow you to turn the switch on or off depending on the configured condition. It is also possible to control other devices in your Network once your Smart Switch has changed.
Reset to factory default | XXXResetDescription |
Inclusion | Single click on the program switch. |
Exclusion | Single click on the program switch. |
NIF | Single click on the program switch. |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Lifeline |
2 | 5 | On Status Change |
Dimensions | 0.0540000x0.0780000x0.0750000 mm |
Weight | 110 gr |
EAN | 1220000013223 |
Device Type | On/Off Power Switch |
Generic Device Class | Binary Switch |
Specific Device Class | Binary Power Switch |
Firmware Version | 03.1a |
Z-Wave Version | 03.53 |
Z-Wave Product Id | 0086.0003.004b |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |