This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
Fire or just smoke? frient Intelligent Heat Alarm. Imagine always having a frient protecting you against fire. Someone who keeps your home and loved ones safe. A frient who makes sure that you are alerted instantly in case of fire - and who is more than just a beep beep.
Avoid false alerts. You have a fireplace in the living room or a dusty and humid storage area and your smoke alarm keeps going off mistakenly? Don"t despair, your frient is here to help. The Intelligent Heat Alarm detects heat instead of smoke helping you to avoid false smoke alarms. It makes sure, you"ll only be alerted when there really is a fire in your home and lets you enjoy the evening in front of your fireplace - without any annoying beep beeps.
Don"t be disturbed in the kitchen. You know the feeling of being a master chef cooking a delicious meal for your family, right? You are preparing 5 things at once; you’ve got something in the oven and several things boiling on the stove, but everything is under control. Suddenly, you hear the most annoying sound – beeeep, beeeep, beeeep. It doesn’t stop. Yep, you got it - it’s your smoke alarm. It has mistakenly identified the smoke from your master chef cooking as a fire. The frient Heat Alarm helps you avoid this issue.
Specifications:
Please note that a Zigbee gateway is required for notification on your smartphone.
Download high resolution images for frient products.
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
Dimensions | 0.0680000x0.0380000x0.0680000 mm |
Weight | 74 gr |
EAN | 5713594002446 |
Frequency | XXfrequency |
Maximum transmission power | XXantenna |