Quickstart
This is a
Window Covering - Pos/End Aware for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
To add this device to your network execute the following action:
Press configuration button 3 times. LED3 is ON.Press and hold once more for 4 seconds.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
Forest Shuttle LZ-Wave and the Forest motorized curtain track systems (FMS) make an unbeatable combination when it comes to noiseless operated motorized curtains. The smooth and silent running curtain track system can, in addition to remote operation, also be operated by hand. Thanks to Forests special Touch Impulse Technology, a gentle pull on the curtain is enough to activate the motor. The Forest Shuttle LZ-Wave also makes sure that your curtains will always hangbeautifully smooth and supple. Opened as well as closed! Touch Impulse Technology, gently pulling the curtain will activate the motor. Integrated Emergency Control ensures manual operation of the curtain in case of power failure. Modular motor, different modules can be attached for various control options: Radio Frequency, Switch, Infrared, Domotics, Building/Hotel Automation, Serial Communication, Z-Wave, etc. Forest Shuttle LZ-Wave will have an internal Z-Wave receiver and BUS connection. Silent motor, speeds: 14 and 17 cm/sec., with slow start and slow stop. Full automatic setting of the limits. Stack-back position programmable to every desired setting. Forest Shuttle LZ-Wave has an integrated power supply. Motor pulley connects motor and FMS track. Also available in upside down version to conceal the motor into the ceiling. Available track lenghts: 5.80 meters and 7.00 meters. FMS track and components available in white and black.
| Reset to factory default |
Press configuration button 25x times. LED 1 is ON. Press and hold once more for 4 seconds to confirm.Please use this procedure only when your network primary controller is missing or otherwise inoperable. |
| Inclusion |
Press configuration button 3 times. LED3 is ON.Press and hold once more for 4 seconds. |
| Exclusion |
Press configuration button 3 times. LED3 is ON.Press and hold once more for 4 seconds. |
| NIF |
XXXNIF |
| Wakeup |
XXXWakeupDescription |
| Protection |
XXXProtection |
| FirmwareUpdate |
XXXFirmwareUpdate |
| SetAssociation |
XXXSetAssociation |
Association Groups:
| Group Number |
Maximum Nodes |
Description |
| 1 |
1 |
Z-Wave Plus Lifeline |
Technical Data
| Hardware Platform |
ZM5202 |
| Device Type |
Window Covering - Pos/End Aware |
| Network Operation |
Always On Slave |
| Z-Wave Version |
6.51.06 |
| Certification ID |
ZC10-15040008 |
| Z-Wave Product Id |
0x0207.0x0027.0x0100 |
| Frequency |
XXfrequency |
| Maximum transmission power |
XXantenna |
