LG Uplus
Smart Gas Controller
SKU: GCR-01
Quickstart
This is a
This must be done when the Gas valve is closed.After doing inclusion action on controller, then hold 5 seconds (-) button until you hear a beep once and P is blinking on LCD.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
U+ Gas lock helps users easily check and turn off the gas valves in home from anywhere. It detects dangerous temperature and alerts potential danger situations so that users can handle a problem. In addition, users can set time to lock gas valves against danger.
| Reset to factory default | Please use this only when the primary controller is missing or otherwise disabled.This must be done when the Gas valve is closed.Hold 15 seconds (-) button until you hear a beep once and FS is displayed on LCD. |
| Inclusion | This must be done when the Gas valve is closed.After doing inclusion action on controller, then hold 5 seconds (-) button until you hear a beep once and P is blinking on LCD. |
| Exclusion | This must be done when the Gas valve is closed.After doing exclusion action on controller, then hold 5 seconds (-) button until you hear a beep once and P is blinking on LCD. |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Z-Wave Plus Lifeline |
Configuration Parameters
Parameter 1: Sound volume setting
0x00: Mute,0x01: Minimum sound volume,0x02: Default sound volume,0x03: Maximum sound volume, Size: 1 Byte, Default Value: 2
| Setting | Description |
|---|---|
| 0 - 3 | Sound volume setting |
Parameter 2: Valve auto lock time setting
This must be done when the Gas valve is open.Upper byte value: hour,Lower byte value: minute,Setting Range : 2min ~9hr 59min (0x0002 ~ 0x093B) Size: 2 Byte, Default Value: 256
| Setting | Description |
|---|---|
| 2 - 2363 | 00(0hr)02(2min) ~ 09(9hr)3B(59min) |
Technical Data
| Hardware Platform | ZM5101 |
| Device Type | Valve |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | HW: 1 FW: 39.132 |
| Z-Wave Version | 6.61.00 |
| Certification ID | ZC10-17055595 |
| Z-Wave Product Id | 0x018B.0x0040.0x0001 |
| Color | White |
| Outdoor Use | ok |
| Firmware Updatable | Not Updatable |
| IP (Ingress Protection) Rated | ok |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |