GATEMAN
A20-SH
SKU: GDA-A2E6B-K0
Quickstart
This is a
Touch Keypad with palm. Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode). Press 'I' button [Registration] from the inside of battery cover.£ Press 9, #, 1, # by sequence on the keypad(to Add). Wait until "Ding dong dang" melody play, then press 'I' button [Registration] from the inside of battery cover.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
A Rim type Digital Door Lock for Smart Home services.'A20-SH' is a security enabled Z-Wave Plus product for Korean domestic market. It can be included and operated in any Z-Wave network with other Z-Wave certified devices.
| Reset to factory default | This product has no function to go back to the factory default. |
| Inclusion | Touch Keypad with palm. Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode). Press 'I' button [Registration] from the inside of battery cover.£ Press 9, #, 1, # by sequence on the keypad(to Add). Wait until "Ding dong dang" melody play, then press 'I' button [Registration] from the inside of battery cover. |
| Exclusion | Touch Keypad with palm. Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode). Press 'I' button [Registration] from the inside of battery cover.£ Press 9, #, 3, # on the keypad by sequence (to Delete). Enter User Code(Normal Mode only. Enter Master Code if operating Master Mode), then press #. Wait until "Ding dong dang" melody play, then press 'I' button [Registration] from the inside of battery cover. |
| NIF | XXXNIF |
| Wakeup | The lock is always in "wake up status".However, touch keypad with palm to begin and end actions. |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Z-Wave Plus Lifeline |
| 2 | 5 | association |
Configuration Parameters
Parameter 1: Silent mode on/off
set the silent mode on or off Size: 1 Byte, Default Value: 3
| Setting | Description |
|---|---|
| 1 | mute |
| 2 | volume low |
| 3 | volume high |
Parameter 2: Auto relock on/off
set the Auto relock on/off Size: 1 Byte, Default Value: 0
| Setting | Description |
|---|---|
| 0 | disable auto relock |
| 255 | enable auto relock |
Parameter 3: relock time
set the relock time Size: 1 Byte, Default Value: 30
| Setting | Description |
|---|---|
| 10 - 180 | This value from 10 to 180 seconds means the time for lock to retain the unlocked state before doing the auto relock |
Technical Data
| Hardware Platform | ZM5202 |
| Device Type | Door Lock Keypad |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | HW: 255 |
| Z-Wave Version | 6.51.06 |
| Certification ID | ZC10-15080019 |
| Z-Wave Product Id | 0x0212.0x1000.0x1000 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |