Greenwave
Smart PowerNode (Schuko version)
SKU: GWRENS310-F
Quickstart
This is a
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
The single port version of the PowerNode, these devices communicate wirelessly to the Gateway, allowing for energy monitoring and device control. Our products come pre-configured to connect to the Gateway with minimal consumer set-up.
| Reset to factory default | XXXResetDescription |
| Inclusion | XXXInclusionDescription |
| Exclusion | XXXExclusionDescription |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Technical Data
| Dimensions | 120x60x70 mm |
| Weight | 140 gr |
| Hardware Platform | SD3402 |
| EAN | 8886464000013 |
| Device Type | On/Off Power Switch |
| Generic Device Class | Binary Switch |
| Specific Device Class | Binary Power Switch |
| Z-Wave Version | 6.01 |
| Certification ID | ZC08-11060019 |
| Z-Wave Product Id | 0x0099.0x0002.0x0002 |
| Frequency | Europe - 868,4 Mhz |
| Maximum transmission power | 5 mW |