Quickstart
This is a
Depends On Host Program for XXXQFrequencyName.
To run this device please connect it to your mains power supply.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law.
The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material.
Use this equipment only for its intended purpose. Follow the disposal instructions.
Do not dispose of electronic equipment or batteries in a fire or near open heat sources.
Attention: This manual is automatically generated from
Z-Wave Alliance Product
data and may be incomplete. Please refer to the
Manufacturers Manual for more information.
Product Description
A USB stick that houses both a Z-Wave and Zigbee radio.Designed for OEMs that want to provide dual functionality when being used with a host device.
Reset to factory default |
XXXResetDescription |
Inclusion |
XXXInclusionDescription |
Exclusion |
XXXExclusionDescription |
NIF |
XXXNIF |
Wakeup |
XXXWakeupDescription |
Protection |
XXXProtection |
FirmwareUpdate |
XXXFirmwareUpdate |
SetAssociation |
XXXSetAssociation |
Association Groups:
Group Number |
Maximum Nodes |
Description |
1 |
5 |
Z-Wave Plus Lifeline |
Technical Data
Hardware Platform |
SD3503 |
Device Type |
Depends On Host Program |
Network Operation |
Role Depends On Host Program |
Z-Wave Version |
6.51.06 |
Certification ID |
ZC10-15090013 |
Z-Wave Product Id |
0x.0x.0x |
Frequency |
XXfrequency |
Maximum transmission power |
XXantenna |