TIMEVALVE
TIMEVALVE SMART
SKU: HY-15-05A
Quickstart
This is a
To enter learn mode(inclusion), press UP arrow for 5 seconds while the valve is open.
Important safety information
Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.Product Description
TIMEVALVE SMART helps users easily check and turn off the gas valves in home from anywhere. It detects dangerous temperature and alerts potential danger situations so that users can handle a problem. In addition, users can set time to lock gas valves against danger.
| Reset to factory default | To reset, Press DOWN arrow for 5 seconds while the valve is open.Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable. |
| Inclusion | To enter learn mode(inclusion), press UP arrow for 5 seconds while the valve is open. |
| Exclusion | To enter learn mode(exclusion), press UP arrow for 5 seconds while the valve is open. |
| NIF | XXXNIF |
| Wakeup | XXXWakeupDescription |
| Protection | XXXProtection |
| FirmwareUpdate | XXXFirmwareUpdate |
| SetAssociation | XXXSetAssociation |
Association Groups:
| Group Number | Maximum Nodes | Description |
|---|---|---|
| 1 | 5 | Z-Wave Plus Lifeline |
Configuration Parameters
Parameter 1: Default Timeout
Valve Default Timeout in seconds Size: 4 Byte, Default Value: 2400
| Setting | Description |
|---|---|
| 300 - 2400 | Valve Default Timeout in seconds |
Parameter 100: Valve report interval
periodic valve state report interval in seconds Size: 4 Byte, Default Value: 86400
| Setting | Description |
|---|---|
| 600 - 16777215 | periodic valve state report interval in seconds |
Parameter 3: Remaining Time
Remaining Time to Close in seconds Size: 4 Byte, Default Value: 2400
| Setting | Description |
|---|---|
| 0 - 35400 | Remaining Time to Close in seconds |
Technical Data
| Hardware Platform | ZM5101 |
| Device Type | Valve - Open/Close |
| Network Operation | Listening Sleeping Slave |
| Firmware Version | 01 |
| Z-Wave Version | 6.51.06 |
| Certification ID | ZC10-15050010 |
| Z-Wave Product Id | 0x022A.0x0100.0x0100 |
| Frequency | XXfrequency |
| Maximum transmission power | XXantenna |