This is a
Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.
Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.
This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.
If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.
For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.
VeraSecure is an easy-to-install comprehensive home controller/alarm hub. It’s like a security panel in a box. Just add sensors, cameras and locks – choosing from dozens of brands – and VeraSecure does the rest. VeraSecure does more than security - you can adjust thermostats, control lights, garage doors, and more. Operate everything from one easy app on your smartphone, tablet or computer.
Compatibility
Works with major wireless protocols: Z-Wave Plus, Wi-Fi, ZigBee, Bluetooth, and VeraLink*; including device brands such as Nest, Schlage, Yale, Kwikset, Aeon Labs, First Alert and many more. Add exactly the devices you want - Motion Detectors, Cameras, Locks, Thermostats, Dimmers, etc.
*VeraLink supports the following 2GIG devices at this time:
Door/window sensors (3 variations), motion sensor, smoke detector, carbon monoxide detector, glass break sensor, tilt sensor, keyfob (4 buttons) and a panic button. At this time all devices are 345MHz (U.S. frequency) only. There are no 433 MHz (EU frequency) devices available yet.
Alarm
Built-in piercing Siren Alarm alerts neighbors and scares off intruders.
Reliability
Battery and cellular backup systems keep your home protected even when power and Internet go out.
Savings
Requires no monthly fees. Compared with cable-TV and alarm companies you’ll save plenty!
Features :
Technical Specifications:
Download high resolution images for VERA CONTROL products.
Please read the user manual before installing the product.
In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.
ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.
On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.
Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.
Here are a few hints for network installation if things dont work as expected.
Dimensions | 0.0480000x0.0440000x0.0470000 mm |
Weight | 613.15 gr |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |