This is a
Battery Usage Tips
Reset to factory default | 1.Remove the device cover.
2.Make sure the sensor is powered.
3.Press and hold the button for 10 seconds, led will blink once.
4.Release the button. |
Inclusion | Quickly, triple click the code button, LED light will flash red for 5 times. |
Exclusion | Quickly, triple click the code button,LED light will flash red for 5 times. |
NIF | XXXNIF |
Wakeup | XXXWakeupDescription |
Protection | XXXProtection |
FirmwareUpdate | XXXFirmwareUpdate |
SetAssociation | XXXSetAssociation |
Group Number | Maximum Nodes | Description |
---|---|---|
1 | 5 | Lifeline |
2 | 5 | Send Binary Switch Report to associated devices in this group. |
3 | 5 | Send Notification to associated devices in this group. |
This parameter defines the output volume when siren plays door bell music. Size: 1 Byte, Default Value: 3
Setting | Description |
---|---|
1 | Low |
2 | Middle |
3 | High |
This Parameter defines the alarm music duration time when siren receive an alarm sensor notification report or an alarm command from controller. Size: 1 Byte, Default Value: 2
Setting | Description |
---|---|
0 | Siren Off |
1 | 30 seconds |
2 | 1 minutes |
3 | 5 minutes |
255 | Siren on |
This parameter defines the door bell music duration time when siren receives a door/window sensor notification report. Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
0 | Siren Off |
1 - 245 | Time in seconds |
255 | Siren always on |
This parameter defines the output volume when siren plays alarm music. Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
1 | Low |
2 | Middle |
3 | High |
This parameter defines the alarm music index for siren play different music when alarm occurs Size: 1 Byte, Default Value: 10
Setting | Description |
---|---|
1 - 10 | Different Sound |
This parameter defines the door bell music index for siren play different music when alarm occurs. Size: 1 Byte, Default Value: 9
Setting | Description |
---|---|
1 - 10 | Different Sound |
This parameter defines the default music index, volume and the duration time for siren on. This parameter can be selected between ALARM MUSIC and DOOR BELL MUSIC. Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
1 | Siren will select ALARM MUSIC MODE to play music |
2 | Siren will select DOOR BELL MUSIC MODE to play music |
This parameter defines the default led enable status when siren is on for ALARM MUSIC MODE. Size: 1 Byte, Default Value: 1
Setting | Description |
---|---|
0 | LED will be disable |
1 | LED will be enable |
This parameter defines the default led enable status when siren is on for DOOR BELL MUSIC MODE. Size: 1 Byte, Default Value: 0
Setting | Description |
---|---|
0 | LED will be disable. |
1 | LED will be enable |
Dimensions | 70 x 68 x 31 mm |
Weight | 50 gr |
Hardware Platform | ZM5202 |
EAN | 6924715900513 |
IP Class | IP 20 |
Device Type | Siren |
Generic Device Class | Binary Switch |
Firmware Version | 02.5e |
Z-Wave Version | 04.26 |
Z-Wave Product Id | 0x0258.0x0003.0x1088 |
Frequency | Europe - 868,4 Mhz |
Maximum transmission power | 5 mW |