Quickstart

This is a Z-Wave Device for XXXQFrequencyName. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

Product Description

The NodOn® Smart Plug (Type F/Schuko) can be controlled via a Home Automation gateway Z-Wave compliant or directly via any other Z-Wave® controller such as the NodOn Soft Remote, the wall switch or the Octan Remote. In German (Schuko) or French (Type E) standard, the plug can be mounted in both side, head up or head down. Combined with its thin design, these 2 specificities allow an easy integration, without obstructing beside sockets on a power strip. Learning process with the controller takes only few seconds. A button allows to switch ON/OFF the Smart Plug locally.  Combined with a Home Automation gateway, the plug can notify a main power outage


    &bull    Self-consumption: <1W
    &bull    Maximum output power: 3000W continuous / 3500W temporary (Resistive load)
    &bull    Radio protocol Z-Wave (+) Plus
    &bull    Range: 30m indoor
    &bull    Main power outage detection and notification

Reset to factory default XXXResetDescription
Inclusion XXXInclusionDescription
Exclusion XXXExclusionDescription
NIF XXXNIF
Wakeup XXXWakeupDescription
Protection XXXProtection
FirmwareUpdate XXXFirmwareUpdate
SetAssociation XXXSetAssociation

Technical Data

Dimensions 0.0360000x0.0510000x0.1040000 mm
Weight 137 gr
EAN 3700313920206
Certification ID ZC10-15030002
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW
EuropeZ-Wave Device