Quickstart

This is a Z-Wave Device for Europe. To run this device please connect it to your mains power supply.



Important safety information

Please read this manual carefully. Failure to follow the recommendations in this manual may be dangerous or may violate the law. The manufacturer, importer, distributor and seller shall not be liable for any loss or damage resulting from failure to comply with the instructions in this manual or any other material. Use this equipment only for its intended purpose. Follow the disposal instructions. Do not dispose of electronic equipment or batteries in a fire or near open heat sources.

What is Z-Wave?

Z-Wave is the international wireless protocol for communication in the Smart Home. This device is suited for use in the region mentioned in the Quickstart section.

Z-Wave ensures a reliable communication by reconfirming every message (two-way communication) and every mains powered node can act as a repeater for other nodes (meshed network) in case the receiver is not in direct wireless range of the transmitter.

This device and every other certified Z-Wave device can be used together with any other certified Z-Wave device regardless of brand and origin as long as both are suited for the same frequency range.

If a device supports secure communication it will communicate with other devices secure as long as this device provides the same or a higher level of security. Otherwise it will automatically turn into a lower level of security to maintain backward compatibility.

For more information about Z-Wave technology, devices, white papers etc. please refer to www.z-wave.info.

Product Description

Your home is a Smart Home if the devices can respond to different happenings in realtime. This various sensors are neccessary. In the OOMI MultiSensor are included 6 various sensors in one device.

It can be used for applications in the area of security, automation or monitoring. The OOMI MultiSensor offers many functions, so you are very flexible in using and installing it. As power supply you can use the delivered USB cable or you choose the battery operated variant - the multisensor customizes to your requirements. 

Motion sensor

You can use the motion sensor for security applications as well as for automation applications. The OOMI MultiSensor recognizes motions in a range of 5 metres and a 100° field of view. To optimize your energy costs you could control your heating management for example or switch off the light if nobody is in the room.

Temperature sensor

A constant room temperature is significant for the comfort and also for the enrgy costs. With the OOMI MultiSensor you can ensure, that the temperature is absolutely perfect everytime. If it is to warm open the motorized window and if it is to cold turn up the heating automatically. The temperature sensor is able to measure temperatures in a range between 0°C and 40°C (32 to 104°F) and reports temperature changes back to the Smart Home Gateway.

Humidity sensor

No one would like to sweat or have to cough the whole time in the living room. This will never happen with the OOMI MultiSensor. The small sensor measures the relative humidity range of 20-80% and reports the datas also to the gateway. Depending on this motorized windows can open or the air dehumidifiers can start with help of a smart plug automatically. 

Light sensor

Control the brightness of your bulb or the opening and closing of the shutters depending on the light intensity - this means to live in a Smart Home. The integrated light sensor in the OOMI MultiSensor measures the level of light in your rooms and your home control system is able to react on them. 

UV sensor

The OOMI MultiSensor accurately measures the level of ultraviolet light which is the kind of light which is responsible for eye damages or furniture bleaching. If the level exceeds the limit values the sensor will detect it and close the shutters or shades automatically.

Vibration sensor

The OOMI MultiSensor contains a seismic sensor which detects and reports event-based vibrations. It monitors the environment and also itself, because the device knows if an intruder is tampering with it or if the sensor has moved from its place of installation. 

Features:

Clue: This product is compatible to Z-Wave Gateways. For detailed information please refer to the compatibility list in the product description. For the manual and parameter settings please refer to the AEOTEC Multisensor 6.

 

Prepare for Installation / Reset

Please read the user manual before installing the product.

In order to include (add) a Z-Wave device to a network it must be in factory default state. Please make sure to reset the device into factory default. You can do this by performing an Exclusion operation as described below in the manual. Every Z-Wave controller is able to perform this operation however it is recommended to use the primary controller of the previous network to make sure the very device is excluded properly from this network.

Safety Warning for Mains Powered Devices

ATTENTION: only authorized technicians under consideration of the country-specific installation guidelines/norms may do works with mains power. Prior to the assembly of the product, the voltage network has to be switched off and ensured against re-switching.

Inclusion/Exclusion

On factory default the device does not belong to any Z-Wave network. The device needs to be added to an existing wireless network to communicate with the devices of this network. This process is called Inclusion.

Devices can also be removed from a network. This process is called Exclusion. Both processes are initiated by the primary controller of the Z-Wave network. This controller is turned into exclusion respective inclusion mode. Inclusion and Exclusion is then performed doing a special manual action right on the device.

Quick trouble shooting

Here are a few hints for network installation if things dont work as expected.

  1. Make sure a device is in factory reset state before including. In doubt exclude before include.
  2. If inclusion still fails, check if both devices use the same frequency.
  3. Remove all dead devices from associations. Otherwise you will see severe delays.
  4. Never use sleeping battery devices without a central controller.
  5. Dont poll FLIRS devices.
  6. Make sure to have enough mains powered device to benefit from the meshing

Technical Data

Dimensions 0.1010000x0.1200000x0.0280000 mm
Weight 34 gr
EAN 6923060102320
Certification ID ZC10-17095774
Frequency Europe - 868,4 Mhz
Maximum transmission power 5 mW

Explanation of Z-Wave specific terms